Unitronic Carbon Fiber Intake & Turbo Inlets for C8 RS 6/RS 7 Matte Carbon(UH032-INA)Change Vehicle

Description

Unitronic is proud to release its Carbon Fiber Intake System and Turbo Inlets for the C8 RS 6 and RS 7 equipped with the 4.0TFSI EA825 engine. This complete Intake System delivers massive gains of up to 58HP / 54LB-FT (Stage 2 93oct) made possible by optimizing airflow and alleviating pre-compressor restrictions with the factory system, netting up to 99.8% more flow than stock.

With five different finishes to choose from including; Gloss Carbon, Matte Carbon, Forged Carbon, Red Carbon Kevlar and Blue Carbon Kevlar, combined together with modular adapter rings on the Turbo Inlets to allow for fitments with both the stock and hybrid turbos, this Intake System allows you to personalize your engine bay with a premium look to match its superior performance.

Click Here To Learn More.

For 2023 RS 6 / RS 7, please add the PCV Adapter Kit for 2023 C8 4.0TT to your order.

Features / Benefits

Optimized Design for Maximum Performance:
Unitronic specifically developed its air intake system to provide increased power, air velocity and throttle response.
Proven Airflow and Power Gains:
Up to 99.8% more flow than stock and +58hp/+55lb-ft tq dyno gains (measured with Unitronic Stage 2 93 AKI tuned vehicle).
Personalize your Engine Bay:
5 carbon fiber finishes to choose from including Gloss, Matte, Forged, Red Kevlar, and Blue Kevlar.
2/2 Twill Prepreg Carbon Fiber Weave:
High quality material to give you a lightweight, durable and resistant airbox. (for Gloss, Matte, and Carbon Kevlar options)
Autoclave Construction:
The curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component. A UV and heat resistant clear coat is then added on top of the carbon fiber to protect it against discoloration and give it a nice, smooth surface finish.
Oversized Turbo Inlets:
Massive 74mm CNC-machined Billet Aluminum Turbo Inlets.
Modular Adapter Rings:
Modular adapter rings available for stock (54mm) and TheTurboEngineers TTE1020 (60mm) turbochargers.
Proprietary Air Filter:
High-flow pleated dry cotton panel filter with a massive 400 sq. in. surface area.
Quality Ribbed EPDM Couplers:
Heavy duty, heat resistant, flexible and durable EPDM couplers will not crack or tear over time.
Stainless Steel Hardware:
Rust resistant hardware that will outlast your vehicle.
Direct Bolt-On Fitment:
Utilizes all OEM mounting locations for simple installation.

Hardware Included

Carbon Fiber Air Box
Carbon Fiber Cowl
74mm CNC-machined Billet Aluminum Turbo Inlets
Modular CNC-machined Billet Aluminum Adapter Rings
Carbon Fiber Winglets
Ribbed EPDM Couplers
High-Flow Pleated Dry Cotton Air Filter
Stainless Steel Clamps
Hardware Kit

Recommended Software

Stage 1
Stage 1+
Stage 2
Stage 3

Related Hardware

$2,999.99USD

Required Options
You must select one of the following option

Options
Click on a product for more information.

PCV Adapter Kit for 2023 C8 4.0TT

$99.99USD

Buy Now

Ships in 2-4 weeks.

Unbeatable Design and Construction

The aesthetics of the air box are derived from organic form that optimizes function. Its design allows induction to utilize the available volume to maximize performance. The two pronounced haunches featured in the top air box promote optimum airflow over the air filter's massive 400 square inch area. The bottom of the air box also features a sweeping divider to help distribute air flow across the area, as it provides the same amount of air flow to each turbocharger.

Quality Materials and Components

Our pursuit for perfection is applied even in the most minute areas of product design and in this case, Unitronic identified that allowing for ample tolerance for engine movement on an item that is both affixed to a dynamic engine and a rigid chassis. Rather than using traditional silicone for its hose connections, this Unitronic Carbon Fiber Intake System uses a high-quality, extremely durable Ribbed EPDM material for its couplers.

Proven Airflow and Power Gains

Unitronic Engineers validated designs with their wide range of in-house development tools, equipment, and software to ensure this new Carbon Fiber Intake System flowed better and developed more power with the help of their Superflow SF-1020 Flow Bench, Maha Chassis Dynamometer, and other resources. The staggering results showed up to 99.8% more airflow and 58HP / 54LB-FT over stock with our Stage 2 (93oct) development vehicle. (Similar gains with the Unitronic Carbon Fiber Intake System can be observed on Stage 1 and Stage 1+ Performance Software levels)

Dyno

Install

The Unitronic Carbon Fiber Intake System for the C8 RS 6 and RS 7 equipped with the 4.0TFSI EA825 engine is designed to be simple to install with all necessary hardware included. Installation time will take approximately one hour including the removal of the factory intake and installation of your new intake system.

Click Here To Watch The Install Video

For 2023 RS 6 / RS 7, please add the PCV Adapter Kit for 2023 C8 4.0TT to your order.

Difficulty Level:
1 / 5

UNITRONIC® is a registered trademark of Unitronic Corporation Inc.
© 2024 Unitronic Performance Software and Hardware. All Rights Reserved.
4633 Louis B-Mayer, Laval, Quebec, Canada, H7P 6G5 Tel.: 1.866.341.2447 / Fax: 1.866.714.9893

*Unitronic is not affiliated with any vehicle manufacturers. All Manufacturer and vehicle names and trademarks are used in this web site are for identification purposes only. All trademarks and trade dress such as Audi ®, Volkswagen ®, VW ®, Seat ®, Skoda ®, Porsche ®, Lamborghini® GTI ®, Golf ®,Golf R ®, Golf City ®, Alltrack ®, SportWagen ®, Cupra ®, Scirocco ®, Jetta ®, GLI ®, R32 ®, Rabbit ®, Passat ®, Passat CC ®, Tiguan ®, Beetle ®, New Beetle ®, EOS ®, Touareg ®, Phaeton ® DSG ®, S Tronic ®, TSI ®, TFSI ®, VR6 ®, A1 ®, A3 ®, S3 ®, RS3 ®, Q3 ® , A4 ®, S4 ®, RS4 ®, A5 ®, S5 ®,RS5 ® Q5 ®, SQ5 ®, A6 ®, S6 ®, RS6 ®, Q7 ®, SQ7 ®, A7 ®, S7 ®,RS7 ® A8 ®, S8 ®, R8 ®, TT ®, TTS ®, TTRS ®, Boxster ®, 911 ®, 996 ®, 997 ®, 991 ®, Panamera ®, Macan ®, 918 Spyder ®, Cayenne ®, Cayman ®, Huracan ®, Huracan Performante ® are registered trademarks of Volkswagen AG, Audi AG, and Porsche AG.

Unitronic Corporation Inc. is not affiliated with the Unitronics Group of Companies. To reach Unitronics Group please follow this link https://www.unitronics.com