Unitronic
Toll Free: 1.866.341.2447 My Cart (0)     FR
 

Unitronic Downpipe for 2.5TFSI EVO(UH051-EXA)Change Vehicle

description-icon
Description
The Unitronic High-Flow Performance Downpipe for 2.5TFSI EVO (DAZA) engines is a direct bolt-on upgrade, designed specifically to eliminate unwanted restrictions in the factory unit and increase power with the help of Unitronic Stage 2 Software. It also helps reduce turbo lag and enhance the exhaust note, while utilizing a GESi 5” G-Sport Ultra High Output UHO+ 400cpsi Catalytic Converter which is engineered to meet or exceed emissions standards.

When combined with Unitronic Stage 2 Performance Software, total output is raised to 621HP/564LB-FT with E85 and other supporting hardware modifications. Read the complete release article.

Warranty Registration is REQUIRED for all products integrating GESi Catalyst(s) HERE.
description-icon
Features / Benefits
  • Cast Stainless Steel pre-cat downturn and post-cat transition
  • Dual 70mm T304 Stainless Steel tubing
  • TIG-welded construction
  • GESi 5” G-Sport Ultra High Output UHO+ 400cpsi Catalytic Converter
  • Factory catalyst placement for maximum efficiency
  • OEM-style corrugated mesh flex bellows
  • Proper factory Oxygen Sensor placement maintained
  • OE exhaust hanger mounting provisions
  • OE Prop-shaft heat shield bracket
  • Direct bolt-on fitment
  • Compatible with factory cat-back exhaust system
description-icon
Hardware Included
  • Unitronic High-Flow direct fit Downpipe for vehicles equipped with 2.5 TFSI EVO engines.
  • All required hardware.
description-icon
Recommended Software
  • Stage 2
description-icon
Recommended Hardware
description-icon
Required Hardware
description-icon
Related Hardware
uh033exa25tfsievodphighlights5v2021web.jpg
imageimageimageimageimageimageimage
Locate Dealer
$1,979.99USD
Options
Click on a product for more information.
Unitronic Drive Shaft Removal Clamp for 2.5TFSI EVO
$98.99USD
Unitronic Midpipes for 8Y RS3, 8V.2 RS3 and 8S TTRS
$329.99USD
Unbeatable Design and Construction
img_093652021uni25tfsievodownpipeweb.jpg
As with the original unit, Unitronic utilized the 1-to-2 split downpipe design. Following Audi’s modeling, Unitronic developed a large high-flow cast stainless steel downturn, increasing cross-sectional area, effectively improving flow and decreasing back pressure. Part of the design criteria was to maintain un-biased flow between the runners. Flow through the large catalytic converter aids with flow distribution; and as a result, pressure and exhaust velocity are balanced to maintain efficiency and the distinct sound of the turbocharged 5-cylinder engine. The post-cat cast stainless steel transition continues, allowing for a smooth transition and flow distribution into dual 70mm T304 stainless steel tubing with OEM-style corrugated mesh flex bellows.
Meets or Exceeds Emissions Standards
img_16602uni25tfsievodownpipeweb.jpg
Unitronic Engineers thoroughly validated designs to ensure the Downpipe yields the results intended with several functional prototypes created. While working together with GESi, Unitronic tested several iterations of their G-Sport Emissions Systems Catalytic Converters to ensure the product meets or exceeds emissions standards and finally chose the GESi 5” G-Sport Ultra High Output UHO+ 400cpsi Catalytic Converter which is rated at up to 1000HP by GESi.
description-icon
Video
description-icon
Install
The Unitronic 2.5TFSI Downpipe is a direct OEM replacement. Using 3D modeling technology, Unitronic's Downpipe is a direct bolt-on upgrade that can be installed within a matter of hours with moderate mechanical knowledge and tools.
difficulty
Difficulty Level:
4 / 5
Installation Guide
View mobile version

UNITRONIC® is a registered trademark of Unitronic Corporation Inc.
© 2024 Unitronic Performance Software and Hardware. All Rights Reserved.
4633 Louis B-Mayer, Laval, Quebec, Canada, H7P 6G5 Tel.: 1.866.341.2447 / Fax: 1.866.714.9893
Sema Logo

*Unitronic is not affiliated with any vehicle manufacturers. All Manufacturer and vehicle names and trademarks are used in this web site are for identification purposes only. All trademarks and trade dress such as Audi ®, Volkswagen ®, VW ®, Seat ®, Skoda ®, Porsche ®, Lamborghini® GTI ®, Golf ®,Golf R ®, Golf City ®, Alltrack ®, SportWagen ®, Cupra ®, Scirocco ®, Jetta ®, GLI ®, R32 ®, Rabbit ®, Passat ®, Passat CC ®, Tiguan ®, Beetle ®, New Beetle ®, EOS ®, Touareg ®, Phaeton ® DSG ®, S Tronic ®, TSI ®, TFSI ®, VR6 ®, A1 ®, A3 ®, S3 ®, RS3 ®, Q3 ® , A4 ®, S4 ®, RS4 ®, A5 ®, S5 ®,RS5 ® Q5 ®, SQ5 ®, A6 ®, S6 ®, RS6 ®, Q7 ®, SQ7 ®, A7 ®, S7 ®,RS7 ® A8 ®, S8 ®, R8 ®, TT ®, TTS ®, TTRS ®, Boxster ®, 911 ®, 996 ®, 997 ®, 991 ®, Panamera ®, Macan ®, 918 Spyder ®, Cayenne ®, Cayman ®, Huracan ®, Huracan Performante ® are registered trademarks of Volkswagen AG, Audi AG, and Porsche AG.

Unitronic Corporation Inc. is not affiliated with the Unitronics Group of Companies. To reach Unitronics Group please follow this link https://www.unitronics.com