Unitronic
Sans Frais: 1.866.341.2447 My Cart (0)     EN
 

Unitronic Stage 3 BT : 936HP / 830LB-FT

bracket

STOCK POWER: 591HP / 590LB-FT

For Audi C8 RS6 4.0 TFSI EA825

Change Vehicle
Octane
93 Octane / 98 Ron gas
HP
+345
LB-FT
+240
description-icon
Description
Unitronic Stage 3 ECU Performance Software C8 RS 6® and RS 7® equipped with the 4.0TFSI EA825 (DJPB) engine and TheTurboEngineers 1020 Hybrid Turbochargers offers up to +336HP / +236LB-FT using 93octane/98ron when combined with Unitronic's Stage 3 AL952 TCU Performance Software.

This Performance Software, paired with the proper required hardware and software listed below, is the ultimate upgrade for your car.

With endless hours of development and optimization, power delivery is smooth with dramatic performance on tap

These software upgrades are entirely compatible with our UniCONNECT+ cable, empowering Clients to tune their vehicles directly through the OBD-2 port within minutes, from the comfort of their own home or garage.

Performance Software for your ECU Box Code is subject to availability.

Unitronic Stage 3 TCU Performance Software is required to run Stage 3 ECU tune.
description-icon
Features
  • Optimized Responsiveness, Smoothness, Drivability, and Comfort
    Unitronic’s ECU calibrations are engineered to improve engine response and reduce low-end lag. Unitronic’s Performance Software has gained worldwide recognition and is well known for its broad powerband, with smooth power delivery, maximizing responsiveness and “area under the curve”, under normal and hard acceleration.

  • Ignition Timing Precisely Calibrated for Higher Octane Fuel
    Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved.

  • Optimized Maximum Output
    Unitronic’s ECU Calibrators deliver the maximum power output while staying within the operational limits of the factory engine and drivetrain components. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine and drivetrain components.

  • Factory Safety Limiters Retained
    OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in reliability.

  • Power Delivery Perfectly Optimized Throughout the Power Band
    Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation.

  • Speed Governor Removed
    Vehicle speed limiter within ECU is removed. (Subject to transmission rotational speed limit.)

  • Standing RPM (soft) limiter increased from 3k to 5k RPM
    Once the vehicle has reached FULL operating temperature, it can be revved to a maximum of 5k RPM in Park or Neutral.

  • Improved Fuel Efficiency
    Optimized timing and injection in cruising condition allows for an improved fuel efficiency, under normalized driving conditions.

  • Engineered with Strict Industry Standards
    With over 10 years of experience with Bosch and Siemens engine management systems and calibrations, Unitronic is able to utilize its expertise, industry leading tools and equipment to ensure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.

  • Extensively Tested Under Various Driving Conditions
    Development begins using Unitronic’s in-house Maha Chassis dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Beta calibrations are then tested in street and track scenarios, using multiple cars under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.

description-icon
Required Hardware
oil-icon
Oil and Additives Recommendation
Unitronic uses and recommends Liqui Moly Oil & Additives exclusively for your vehicle, which meet Audi/VW approvals. To ensure your vehicle is maintained with the #1 oil brand in Germany, see what is recommended for you with the
Liqui Moly Oil Guide.
Locate Dealer
$2,210.00USD $2,600.00USD You save $390USD until January 6th, 2025
Upgrade Pricing Chart Button

Switch and Save
Save 15% or $150 (whichever is greater) on NEW Unitronic Performance Software from December 23, 2024 to Janualy 6, 2025.
See details.
Dyno Image
Upgrade Pricing Chart for Audi C8 RS6 4.0 TFSI EA825 Unitronic Software Guarantee for Audi C8 RS6 4.0 TFSI EA825 Unitronic Software Warranty for Audi C8 RS6 4.0 TFSI EA825 Unitronic Hardware Warranty for Audi C8 RS6 4.0 TFSI EA825
Voir la version Mobile

UNITRONIC® est une marque déposée de Unitronic Corporation Inc.
© 2024 Unitronic Logiciel et Matériel de Performance. Tous droits réservés.
4633 Louis B-Mayer, Laval, Québec, Canada, H7P 6G5 Tel.: 1.866.341.2447 / Fax: 1.866.714.9893
Sema Logo

*Unitronic n'est pas affilié à aucun fabricant de véhicules. Tous les noms et marques déposées des fabricants et véhicules utilisés sur ce site web sont à des fins d'identification uniquement. Toutes les marques déposées telles que Audi ®, Volkswagen ®, VW ®, Seat ®, Skoda ®, Porsche ®, Lamborghini® GTI ®, Golf ®, Golf R ®, Golf City ®, Alltrack ®, SportWagen ®, Cupra ®, Scirocco ®, Jetta ®, GLI ®, R32 ®, Rabbit ®, Passat ®, Passat CC ®, Tiguan ®, Beetle ®, New Beetle ®, EOS ®, Touareg ®, Phaeton ® DSG ®, S Tronic ®, TSI ®, TFSI ®, VR6 ®, A1 ®, A3 ®, S3 ®, RS3 ®, Q3 ®, A4 ®, S4 ®, RS4 ®, A5 ®, S5 ®, RS5 ®, Q5 ®, SQ5 ®, A6 ®, S6 ®, RS6 ®, Q7 ®, SQ7 ®, A7 ®, S7 ®, RS7 ®, A8 ®, S8 ®, R8 ®, TT ®, TTS ®, TTRS ®, Boxster ®, 911 ®, 996 ®, 997 ®, 991 ®, Panamera ®, Macan ®, 918 Spyder ®, Cayenne ®, Cayman ®, Huracan ®, Huracan Performante ® sont des marques déposées de Volkswagen AG, Audi AG, et Porsche AG.

Unitronic Corporation Inc. n'est pas affilié au Groupe Unitronics. Pour contacter le Groupe Unitronics, veuillez suivre ce lien https://www.unitronics.com