Unitronic
Toll Free: 1.866.341.2447 My Cart (0)     FR
 

Unitronic Stage 3 BT : 652HP / 564LB-FT

bracket

STOCK POWER: 400HP / 354LB-FT

For Audi RS3 8V 2.5TFSI EVO

Change Vehicle
Octane
HP
+252
LB-FT
+210
description-icon
Description
Unitronic Stage 3 TTE700 Performance Software is precisely calibrated for use with a TTE700 for 93octane fuel and full hardware bolt-ons.

Unitronic strongly urges its Stage 3 ECU Performance Software calibrations to be utilized together with a built engine/fortified bottom end. Stage 3 ECU Calibrations for the TTE700 are available in a "torque-limited" and "unlimited" formats, with Ethanol fuel. Maximum or "unlimited" torque ECU calibrations are meant to be used with built engines and require an Iroz Motorsports Single Brushless LPFP and Unitronic 4 bar MAP sensors.* Stage 3 TTE700 93oct/98ron ECU calibrations are also available with the LPFP and MAP sensor upgrades. Power figures displayed for Stage 3 TTE700 with E85 fuel are not representative of the maximum torque ECU calibrations. Stage 3 TTE700 "Torque-limited" ECU calibrations for Ethanol fuel are for use with the stock LPFP and MAP sensors. Stock LPFP's are not all created equally and output may vary; Ethanol content levels should remain ~E70 with the stock LPFP, air quality dependent.

Unitronic Stage 3 TCU Performance Software is required to run Stage 3 ECU tune.

Performance Software for your ECU Box Code is subject to availability.

2019+ models may require to have the hood opened during the flashing process.

*Unitronic 4 bar TMAP sensors are only available for customers who own or have purchased together with Stage 3 ECU Performance Software.


UniFLEX


Unitronic FLEX fuel enabled ECU Performance Software Calibrations are available for this platform allowing for seamless transitions between 100% gasoline to 85% ethanol and anything in between, without requiring an ECU reflash. This FLEX enabled Software is available for an additional fee and it covers all lower stages up until your highest purchased stage as well. UniFLEX Hardware is required in order to take advantage of these FLEX enabled calibrations.** Please contact Unitronic or your local Authorized Dealer to learn more.

FLEX ADD-ON PRICE: $500*


*FLEX Software add-on pricing may vary for other regions.

**MY2022 TTRS requires this UniFLEX Hardware kit.
description-icon
Features
  • Engineered with Strict Industry Standards
    With over 20 years of experience with Bosch and Siemens engine management systems and calibrations, Unitronic is able to utilize its expertise, industry leading tools and equipment to ensure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.

  • Extensively Tested Under Various Driving Conditions
    Development begins using Unitronic’s in-house Maha Chassis dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Beta calibrations are then tested in street and track scenarios, using multiple cars under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world.

  • Factory Safety Limiters Retained
    OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in reliability.

  • Optimized Responsiveness, Smoothness, Drivability, and Comfort
  • Unitronic’s ECU calibrations are engineered to improve engine response and reduce low-end lag. Unitronic’s Performance Software has gained worldwide recognition and is well known for its broad powerband, with smooth power delivery, maximizing responsiveness and “area under the curve”, under normal and hard acceleration.

  • Optimized Maximum Output
    Unitronic’s ECU Calibrators deliver the maximum power output while staying within the operational limits of the factory engine and drivetrain components. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine and drivetrain components.

  • Speed Governor Removed
    Vehicle speed limiter within ECU is removed. (Subject to transmission rotational speed limit.)

  • Left Foot Braking (LFB) Enabled
    LFB allows users to apply load on the engine using their left foot on the brake, to build boost when the edge is needed at the race track.

  • Spark-based "Motorsports" Style Rev-limiter Enabled
    The traditional rev limiter will de-load of the engine as engine speed reaches maximum RPM. Unitronic has enabled the spark-based rev-limiter, to avoid the de-loading, allowing power all the way to the rev-limiter.

  • Exhaust Crackle/Overrun Enabled
    Unitronic has recalibrated the Exhaust Crackles/Overrun/Pops & Bangs when in Dynamic/Sport Mode to be more aggressive and louder.

  • Exhaust Flaps Always Open in Dynamic/Sport Mode
    In factory form, both Exhaust Flaps are not open when in Dynamic/Sport Mode. Unitronic enables both Exhaust Flaps to be open at all times, when in Dynamic/Sport Mode, for maximum performance and sound.

  • Full Staged Software Suite
    Includes all Stage 3 tune variants and all lower software stages as well.
  • Rolling Anti-Lag (RAL)
    Unitronic is also proud to announce the addition of Rolling Anti Lag (RAL) into these new FLEX enabled calibrations. FUNCTION USAGE: Turn cruise control ON, but not activated. Hold down cruise control stalk downwards (decrease speed, -), then go wide open throttle WOT. You can do this with your left fingers, while both hands are on the steering wheel with ease. PRECONDITIONS FOR FUNCTION TO BE ACTIVE: 70degC coolant temp minimum threshold, more than 1000rpm engine speed, more than 30kph vehicle speed, and more than 45% throttle position. The function will be activated for 6 seconds maximum and can't be re-activated for 15 seconds refresh time. This function is very hard on the engine and its components - IT IS NOT FOOL PROOF. It's easy to melt an engine to the ground with it. Use it wisely and at your own peril.
oil-icon
Oil and Additives Recommendation
Unitronic uses and recommends Liqui Moly Oil & Additives exclusively for your vehicle, which meet Audi/VW approvals. To ensure your vehicle is maintained with the #1 oil brand in Germany, see what is recommended for you with the
Liqui Moly Oil Guide.
Locate Dealer
$1,530.00USD $1,800.00USD You save $270USD until December 6th, 2024
Save 15% or $150 (whichever is greater) on NEW Unitronic Performance Software from November 21, 2024 to December 6, 2024.
See details.
Dyno Image
View mobile version

UNITRONIC® is a registered trademark of Unitronic Corporation Inc.
© 2024 Unitronic Performance Software and Hardware. All Rights Reserved.
4633 Louis B-Mayer, Laval, Quebec, Canada, H7P 6G5 Tel.: 1.866.341.2447 / Fax: 1.866.714.9893
Sema Logo

*Unitronic is not affiliated with any vehicle manufacturers. All Manufacturer and vehicle names and trademarks are used in this web site are for identification purposes only. All trademarks and trade dress such as Audi ®, Volkswagen ®, VW ®, Seat ®, Skoda ®, Porsche ®, Lamborghini® GTI ®, Golf ®,Golf R ®, Golf City ®, Alltrack ®, SportWagen ®, Cupra ®, Scirocco ®, Jetta ®, GLI ®, R32 ®, Rabbit ®, Passat ®, Passat CC ®, Tiguan ®, Beetle ®, New Beetle ®, EOS ®, Touareg ®, Phaeton ® DSG ®, S Tronic ®, TSI ®, TFSI ®, VR6 ®, A1 ®, A3 ®, S3 ®, RS3 ®, Q3 ® , A4 ®, S4 ®, RS4 ®, A5 ®, S5 ®,RS5 ® Q5 ®, SQ5 ®, A6 ®, S6 ®, RS6 ®, Q7 ®, SQ7 ®, A7 ®, S7 ®,RS7 ® A8 ®, S8 ®, R8 ®, TT ®, TTS ®, TTRS ®, Boxster ®, 911 ®, 996 ®, 997 ®, 991 ®, Panamera ®, Macan ®, 918 Spyder ®, Cayenne ®, Cayman ®, Huracan ®, Huracan Performante ® are registered trademarks of Volkswagen AG, Audi AG, and Porsche AG.

Unitronic Corporation Inc. is not affiliated with the Unitronics Group of Companies. To reach Unitronics Group please follow this link https://www.unitronics.com